Product Center
LPB1001
General Description
The LPB1001 product is a highly integrated solution for Li-Ion battery protection. It includes advanced power MOSFETs, precision voltage detection circuitry and delay circuitry for all the protection functions required in battery applications, including overcharge, overdischarge, overcurrent and load short circuit protection. Its accurate overcharge detection voltage ensures a safe and efficient charging cycle. The low standby current allows for almost no battery current to be consumed during storage. The LPB1001 is available in an ultra-small TDFN-4 package. Its simple peripheral circuit requires only one external capacitor. This chip is suitable for any electronic device that requires long-term continuous power supply from a Li-Ion battery.
Features
Protection of Battery Cell Reverse Connection
Over-temperature Protection
Integrate Advanced Power MOSFET with Equivalent of 70mΩ RDS(ON)
Two-step Overcurrent Detection: Overdischarge Current Load Short Circuiting
Overcharge Current Protection
0V Battery Charging Function
Delay Times are generated inside
High-accuracy Voltage Detection
Low Current Consumption: Operation Mode: 1.5μA typ.
Applications
Any application that requires long periods of power from a Li-Ion battery
相关推荐
-
LP5305A
The LP5305A is a highly integrated circuits, it used to protect low voltage system from abnormal high input voltage. The IC continuously check the input voltage, the input current, and the battery voltage. When the protection status is occur, the power MOS will turn off at the same time. The LP5305A is safety devices to ensure worked against accidents. In case of the input voltage exceeds a OVP threshold voltage level, the power MOS will turn off within 1μs. The current limit can is adjustable by external resistor between ISET and GND. And the current is also limited to prevent charging the battery with an excessive current. The LP5305A also monitors the Li-ion battery voltage, when the battery voltage exceeds 4.35V, the IC will turn off the MOS. Other features include over temperature protection and under-voltage lockout (UVLO). The LP5305A is available in a space saving DFN-8 package. -
LP5301
The LP5301 is an Over-Voltage-Protection(OVP) and programmable Over-Current-Protection (OCP) device. The device will switch off internal MOSFET to disconnect VIN to VOUT to protect load when any of input voltage, input current over the threshold. The Over temperature protection (OTP) function monitors chip temperature to protect the device. The LP5301 is available in SOT-23-6, DFN-8 2*2mm package. Standard products are Pb-free and Halogen-free. -
LP5300
The LP5300 is an Over-Voltage-Protection (OVP) and Over-Current-Protection (OCP) device. The device will switch off internal MOSFET to disconnect VIN to VOUT to protect load when any of input voltage, input current over the threshold. The Over temperature protection (OTP) function monitors chip temperature to protect the device. The LP5300 is available in SOT-23-6L and SOT89 package. Standard products are Pb-free and Halogen-free. -
LN8243
General DescriptionThe LN8243 provides a high integration solution for lithium-ion/polymer battery protection. The... -
LN8240
LN8240 是一种高精度单节锂离子/锂聚合物电池保护 IC。 LN8240 在传统电池保护电路基础上将开关 MOSFET 集成在 IC 内部;它具有过充电压保护,过放电压及电 流保护,过热保护,电芯反接保护和充电器反接保护。 LN8240 具有极低功耗,可使用于长时间待机系统;占用空间极小,有利于简化应用电路。 -
LN8232
The LN8232 provides a high integration solution for lithium-ion/polymer battery protection. The LN8232 contains advanced power MOSFET, high-accuracy voltage detection circuits and delay circuits. The LN8232 has all the protection functions required in the battery application including over-charging, over-discharging, over-current and load short circuiting protection etc. The low standby current drains little current from the cell while in storage. The device is targeted for any Li-Ion and Li-Poly battery-powered information appliances requiring long-term battery life.